Quick answer
- Compact tractor or small skid steer: a 3/4-ton (F-250, 2500 HD, Ram 2500).
- Large skid steer, track loader or mini excavator: a 1-ton (F-350, 3500 HD, Ram 3500).
- Over 16,000 lbs loaded: 1-ton dually with a gooseneck — and check the CDL rule.
Start With the Machine, Not the Truck
Add up the machine's operating weight, its attachments (buckets, forks, grapples, breakers) and the empty trailer. A 7,500 lb skid steer with two buckets on a 2,800 lb trailer is already over 10,500 lbs. That number — not the truck's brochure tow rating — decides which truck you need.
Then check payload. Tongue weight counts against payload, and heavy equipment trailers put a lot of it on the hitch.
Machine vs. Trailer vs. Truck Chart
| Machine | Typical weight | Trailer | Truck class |
|---|---|---|---|
| Compact tractor (25–40 hp) | 3,000–5,500 lbs | 16–18 ft, 10K GVWR | 3/4-ton |
| Small skid steer | 5,500–7,000 lbs | 18–20 ft, 10K–14K GVWR | 3/4-ton |
| Large skid steer / track loader | 8,000–11,000 lbs | 20–22 ft, 14K–16K GVWR | 1-ton |
| Mini excavator (3–6 ton) | 7,000–13,000 lbs | 18–22 ft, 14K–16K GVWR | 1-ton (dually recommended) |
| Mid-size excavator / backhoe | 14,000–20,000+ lbs | Gooseneck 25K+ GVWR | 1-ton dually or larger (CDL likely) |
General estimates. Machine weights vary by model and attachments; confirm with the spec sheet, your trailer's VIN plate and your truck's door-jamb sticker.
The Tongue Weight Math
Load the machine so about 10%–15% of the total weight sits on the hitch. Too little and the trailer can sway; too much and you overload the truck's rear axle.
Example: 5-ton mini excavator on a 14K trailer
- Excavator + bucket: ~10,500 lbs
- Trailer empty weight: ~3,000 lbs
- Total: ~13,500 lbs → tongue weight (12%): ~1,620 lbs
- Result: past most half-tons; fits a properly equipped 1-ton with room for crew and tools
Our how much can my truck tow guide shows where to find each rating on your truck.
3/4-Ton vs. 1-Ton for Equipment Hauling
Half-tons are left out on purpose: once a real machine is on the deck, payload and hitch limits run out fast. Compare all three classes in half-ton vs. 3/4-ton vs. 1-ton trucks.
3/4-Ton Trucks
Ford F-250 · Chevy Silverado 2500 HD · GMC Sierra 2500 HD · Ram 2500
Right for compact tractors and smaller skid steers.
- Handles 10K and many 14K bumper-pull equipment trailers within ratings
- Diesel versions add torque for ramps, hills and job-site starts
- Payload gets tight once you add tongue weight, attachments and fuel
- Good fit for landscapers and property maintenance crews
1-Ton Trucks (SRW and Dually)
Ford F-350 · Chevy Silverado 3500 HD · GMC Sierra 3500 HD · Ram 3500
The standard for mini excavators, track loaders and daily hauling.
- Most payload room for heavy tongue or gooseneck pin weight
- Dually rear wheels keep heavy loads steady in wind and on curves
- Pairs with 16K bumper pull or 20K+ gooseneck equipment trailers
- The usual pick for excavation, site work and rental hauling
Need the trailer to haul your machine?
Apply in a few minutes for an equipment trailer. Contractors, startups, farms and personal buyers welcome.
Check my financing optionsReal Work Trucks for Hauling Equipment

A solid match for a mini excavator or small skid steer on a 10K–14K bumper-pull trailer. The Duramax diesel pulls steady on the highway.

Built for big gooseneck equipment trailers. Wider front axle and extra towing room for compact track loaders and tractors.

For crews moving heavy machines every day. Add a flatbed and gooseneck ball and it becomes a true equipment hauler. Check CDL rules when combined weight goes over 26,000 lbs.
Want exact tow and payload numbers for 1-ton trucks? See the spec table in our best trucks for gooseneck trailers guide.
Truck photos via Wikimedia Commons: Deathpallie325 (CC BY-SA 4.0), Bull-Doser (public domain), HJUdall (CC0). WeFinanceTrailers.com is not affiliated with Ford, Chevrolet, Ram or Kubota.
Bumper Pull vs. Gooseneck Equipment Trailers
Bumper-pull equipment trailers up to 14K–16K GVWR cover most skid steers and mini excavators. Past that, a gooseneck trailer puts the weight over the truck's rear axle and tows far steadier. For bigger machines, see heavy equipment trailers, lowboys and RGNs.
6-Point Check Before You Haul
- Machine + attachments + trailer stay under the trailer's GVWR
- Tongue or pin weight fits your truck's payload and hitch rating
- Machine is centered slightly ahead of the trailer axles
- Four-point chain tie-down with rated chains and binders
- Bucket or blade lowered to the deck and secured
- Combined weight stays under your truck's GCWR
Hauling for work? Learn the 26,001 lb CDL rule — a 1-ton plus a 16K equipment trailer can cross it.
Frequently Asked Questions
What size truck do I need to haul a skid steer?
A loaded skid steer and equipment trailer usually weigh 10,000 to 14,000 lbs. Most operators use a 3/4-ton (F-250, Silverado 2500 HD, Sierra 2500 HD, Ram 2500) for smaller skid steers and a 1-ton (F-350, 3500 HD, Ram 3500) for large frame skid steers and compact track loaders.
Can a half-ton truck pull a mini excavator?
Only the smallest machines. A 1 to 2 ton micro excavator on a light trailer may fit a properly equipped half-ton. A 4 to 6 ton mini excavator plus a 14K trailer puts 1,400 to 2,100 lbs on the hitch, which is past most half-ton payload and receiver limits.
What truck do I need to haul a mini excavator?
For a 3 to 6 ton mini excavator on a 14K to 16K equipment trailer, a 1-ton truck is the common choice. Many operators choose a dually and a gooseneck trailer for extra stability.
Bumper pull or gooseneck for heavy equipment?
Bumper pull equipment trailers up to 14K work well with 3/4-ton and 1-ton trucks. For loads over 16,000 lbs, a gooseneck trailer and 1-ton dually give better stability and put the weight over the rear axle.
Do I need a CDL to haul a mini excavator?
It depends on combined weight. If the truck and trailer GVWR together are over 26,000 lbs and the trailer is over 10,000 lbs, a Class A CDL is usually needed for commercial use. A 1-ton with a 16K trailer can cross that line.
Can I finance an equipment trailer and a machine separately?
Yes. Many buyers finance the trailer on its own. You can apply for the trailer at WeFinanceTrailers.com whether you already own the truck and machine or not.
Final Thoughts
Weigh the machine, pick the trailer to carry it, then pick the truck to pull both. For most crews, that means a 3/4-ton for tractors and small skid steers, and a 1-ton for mini excavators and track loaders. Estimate a monthly payment with the trailer payment calculator.
Ready to Finance Your Equipment Trailer?
New or used, dealer or private seller. Apply online in minutes and see your options.
Start your application